Laboratory Equipment

We are a standout provider of Laboratory Incubator to our clients. These are versatile air jacketed natural convection incubators. These are specially designed for uniform temperature distribution and minimal sample contamination caused by external air intrusion. These are used in laboratories for different applications. Experts have tested offered range on well defined parameters before delivering in market for sale.

Features:

• Temperature control: +5°C above ambient to 70°C
• Microprocessor PID control
• Simple calibration and auto-tuning functions
• Digital timer with Delayed ON/OFF function: 1 min to 99 hr 59 min
• High temperature limit setting and open door alarm
• Convenient preset function for 3 most commonly used temperature settings
• Intuitive control panel with bright LED display (01??? resolution) and touch-sensitive keypad
• RS-232 interface
• Fully insulated dual-wall door with magnetic rubber gasket
• Vibration-free design ideal for yeast cultivation
• Compact and lightweight construction with completely sealed gasket
• Stackable up to 2 units using the optional stacking kit (optional)
• Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door
• Detachable shelves and round-cornered chamber interior allowing easy cleaning
• Durable heating element with radiator fins for efficient heat dissipation
• Built-in cable port to use other instruments inside the chamber

Labocon Peristaltic Pump LPP-100 Series are high precision pumps with low or medium flow rate featuring automatic or manual speed control. It is equipped with dual CPU control system that separates the drive and helps in quick and stable operation. It is compact with easy to use feature and does not contaminate the fluid during operation. It provides flexible solutions for a variety of demanding applications from low flow lab pumps to high flow industrial pumps for dispensing, filling, metering, dosing, sampling and transferring applications.

Features:

• Automatic 60 seconds test timer
• Dual CPU control system separates the drive and control
• Three-digit LED display
• External start–stop, direction change and speed control mode available
• External control signal of 0-5 V, 0-10 V, 4-20 mA can be detected
• High torque, power saving system
• Data can be stored and recovered on power or system failure
• Multiple pump heads can be attached to meet different applications in the same pump.

A&D's original, tuning fork vibro method* promises you high accuracy and a wide measurement range without replacing the sensor plates!! (* Patent approved) Tuning Fork Vibro Viscometer SV series measures viscosity by detecting the driving electric current necessary to resonate the two sensor plates at a constant frequency of 30Hz and amplitude of less than 1mm.

Selectable Wide Measurement Range:
Samples with very low viscosity to high viscosity can be measured without changing the sensor plates, so a wide range of measurements can be made continuously. (SV-10: 0.3mPa·s-10,000mPa·s / SV-100 1,000mPa·s-100,000mPa·s)

High Measurement Accuracy:
The SV series, incorporating the innovative tuning fork vibro method, provides an excellent repeatability of 1% of the measured value (by standard deviation) for viscosity measurement.

Temperature Measurement:
It is very important to measure the temperature of the fluid correctly because the viscosity is very much dependent upon the temperature of the fluid (-2% to -10%/ºC). The SV series can detect accurate temperature immediately with a temperature sensor (0 to 160ºC range) located right next to the viscosity sensor plates.

Highly Stable Measurement:
The sensor plates have very small thermal capacity and cause only minute displacement in the sample liquid, which prevents changes to the temperature and the physical properties of the sample.

Continuous Measurement:
The SV series allows measurement of the cloud points of samples such as surface active agents and of surface/interface changes such as wettability due to its ability to measure a wide range without the need to replace the sensor plates.

Easy Calibration:
Both one-point and two-point calibrations are possible using either viscosity standard liquids (optional) or samples of known viscosities. Simplified Calibration function, a one-key operation that utilizes purified water is also available for the SV-10.

Data Collection and Graphing Software:
WinCT-Viscosity (RsVisco) software transmits viscosity and temperature measurement data to a PC and displays it on a graph in real-time. 

Small Sample Size:
The standard sample cup requires just over 35ml of sample fluid so there is very little waste. (Optional 10ml/13ml sample cups are also available.)

Easy Cleaning:
Due to their simple structure, the SUS 304 stainless steel sensor plates and temperature sensor (all gold-plated) and SUS 304 stainless steel protector can be quickly and easily cleaned

Labocon Horizontal Autoclave LHA-100 Series is designed to provide a safe, reliable and accurate steam sterilization performance for a wide range of sterilization applications in modern laboratories. It is suitable for applications that require routine destruction of all living micro-organisms. 

Features:

• High quality stainless steel chamber
• With drying function
• Controlled automatic sterilization
• Door remains locked if pressure exceeds 0.027 MPa
• Automatic opening of safety valve when pressure exceeds 0.165 MPa
• Automatic power cut-off and water cut-off in case of lack of water
• Over temperature, over pressure, auto-protection device

Application:
Labocon Horizontal Autoclave is widely used for sterilization applications in biotechnology industries, pharmaceutical industries, hospitals, research laboratories, etc

The unit is specially designed to meet the requirement of high temperature the casing is made of M.S reinforced with iron angles duly painted. Chamber made of ceramic zirconium board and elements are palced horizontally in the Chamber. Heating is done by imported silicon Carbide Rods duly controlled by Accurate step down Transfremer (Air cooled). It saves energy upto 30% with easily replaceable carbide rods. These furnaces have outstanding temperature reliabily and have large surface radiation rati to enhance thermal efficiency and power consumption. Control panel is fitted with digital temperature indicator cum controller seperately having Ammeter and Volt Meter etc.

Convenient operation without effort:
The unique valve system allows for easy compression of the newly designed bellows. 50 ml of fluid can be drawn in within just 11 seconds. The spring loaded lever enables an even more sensitive filling and delivery of liquids. The meniscus is easily adjustable.

Ergonomic design:
The optimized design, the practical arrangement of functions, and the low weight of 125 g offer reliable operation during serial pipetting tasks, even for inexperienced users.

Broad area of applications:
One single macro pipette controller covers the entire range of bulb and graduated pipettes from 0.1 to 200 ml. The conical silicone adapter offers a secure fit for the different diameters. The unit is fully autoclavable at 121 °C (2 bar) according to DIN EN 285. A hydrophobic membrane filter protects the system from liquid penetration.