|Net Storage Capacity||388 Ltr|
|Temperature Range||-80"C /- 86"C|
Visual and Automatic Determination It includes a color display to observe the phase transition, is equipped with a
video camera and a video replay function which allows reviewing the melting point determination. It also suit for color samples, which tradition automatic melting point apparatus not available.
Available Testing 4 Samples Concurrently
Max concurrent sessions 4 samples each batch, record and track each result independently, meet FDA CFR21 part 11 requirements.
Multi-user ID Classify Function
Adopt User ID management function. Users ID are available for adding, deleting and jurisdiction setting.
|Usage/Application||Water quality testing|
LABMAN LMMP-30 water quality meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 water quality parameters, including pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature,
MULTI-POINT PUSH-BUTTON CALIBRATION
The meter has multi-point calibration mode. From setup menu, choose calibration
and immerse electrode into indicated calibration solution, press ENTER key and meter is automatically calibrated.
During calibration, if the calibration solution or selected value does not match the meter's indicated value, an ERROR message is displayed.
VIEWING OF ELECTRODE SLOPE
After calibration, the percentage slope of the electrode is displayed before the meter returns to measurement mode. Per the slope value, user decides whether to change the electrode.
AUTOMATIC TEMPERATURE COMPENSATION : By using temperature probe
AUTO-RANGING FOR CONDUCTIVITY
Themeterhas auto-rangefunctionsformeasuringconductivityandtotal dissolved solids (TDS). Upon immersing conductivity sensor into sample
solution, the screen immediately displays the value in appropriate measurement range for accuracy,
ADJUSTABLE TEMPERATURE COEFFICIENT
Various ions in solution have different temperature coefficients. LABMAN-LMMP30. can set the temperature coefficient between 0 and 3.9% in degrees centigrade for optimum accuracy.
ADJUSTABLE CELL CONSTANT
The meter has three cell constants for measuring requirements. Once a cell constant has its calibration set, it is saved and does not require re-calibration when switching meter.
LABMAN-LMMP30 displays helpful messages like an on-screen manual for easy operation of this meter and selection of the various options.
SAVE AND COMMUNICATION INTERFACE
Themeter allhasreal-timedate/clockstamps.Thememorystoresupto 99discretedatasets.PresstheSAVEkeytostorethecurrent measured values and it automatically generates a serial number with the date
and time. This data can then be sent to a computer via the USB port
*Your information is safe with us.
The Ultrasonic energy is produced by converting electrical energy in to Mechanical Vibrations by using generator and piezo Electric Transducers. Due to Mechanical Vibrations in cleaning liquid this Phenomenon is called cavitation. In a very short time it removes all dirt & foreign bodies from components which are immersed in the cleaning liquid.
Continuous Self Tuning Circuitry For Any change In Workload, Liquid Level And Bath Temp.
·Uniform Cavitations Through Out The Tank ·Separate Oscillator Eliminates Damage To Generator In Case of Failure Of Transducers ·Using 40 Khz Frequency For Effective Cleaning With Low Noise
·Designed For Complete Cleaning Of Small and Large Components Without Dismantling, ·Inner tank and Outer body made of Stainless Steel
|Maximum Viscosity Range||100+|
Each of our standard Laboratory Viscometers/ Rheometers are supplied with an internal spring used to calculate the viscosity of a material. These springs have different measuring capabilities:
LV is for low viscosity materials and can measure the thinnest materials. Typical examples include inks, oils, and solvents.
RV is for medium viscosity materials than those measured with an LV torque. Typical examples include creams, food, and paints.
HA is for higher viscosity materials than those measured with an RV torque. Typical examples include gels, chocolate and epoxies.
HB is for even higher viscosity materials than those measured with an HA torque spring. Typical examples include asphalt, caulking compounds, and molasses.
*Your information is safe with us.